Dust blow gun – compressed air

I know, that there is possible to work with a hand-pump too – but trust me, the difference is HUGE. If You work with 2-3 bar, or special cases 5-6 bars, any solid contamination will be eliminated.

At first, You will need an oil-free compressor, if possible a silent one. After this, a filtering – there are cheep and expensive solutions. then a flexible hose, and of course a dust blow gun too. (Before I had a normal one – placed in the basement because of the 97 dB (!!!) noise.)

Here You see, what I use at the moment, this is as noisy as a washing machine:

HBM 25 kompresszor   kompresszor













Unfortunately the air gun is not a Swiss quality Mosolygó arc, so at first I had to disassemble and reassemble it.

About canonrepair

Ruzsa János. Amatőr fotós, Canon DSLR váz. Amateur photographer. Canon DSLR user.
This entry was posted in dirty, dust, tools. Bookmark the permalink.

3 Responses to Dust blow gun – compressed air

  1. Ando Gyula says:

    Can u use that to clean dslr sensor?

    • canonrepair says:

      I use ONLY this in the last 4 years (the old noisy one). At first you have to check ANY compressor and air system. Not so difficult, just blow the air on a clean glass surface. It has to be clean after minutes of blowing too. If you want the perfect filtering, just buy it here:
      Be careful: if ANY particle remains in the line, you will make unrepairable grooves in the glass or DSLR sensor, as they get a really high speed.

  2. colt says:

    I worked in a factory where we had a 6bar pneumatic system… was the best for cleaning anything 😀 So ican agree!

Opinion, question?

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s